Please fill out the form below and give us
as much information about yourself as possible. Fields marked with
an asterisk (*) are required.
We will only use your e-mail address
and information supplied by you to contact you about services/products that you
have indicated are of interest to you.
Contact Information
*
Contact
Title
*
Phone
Fax
*
Email
Website URL
Vessel
Shell outside radius
Vertical distance from horizontal center line of
vessel to center line of tuyère working point
Angle of tuyère relative to the horizontal
Radius inside refractory
Tuyère spacing
Number of tuyères
Number of tuyères outboard of riding rings
Position of tuyères relative to riding rings
Riding ring radius
Tuyère Body
Preferred stroke of punching cylinder (
for standardization if other punchers are on-site)
Inside diameter of tuyère pipe
Type of valve (i.e. ball or flap)
Flexible air hose connection (i.e. thread size and type,
grooved coupling etc.)
Structure
Distance from horizontal center line of vessel to top of
punching platform floor
Headroom from top of floor
Horizontal distance from vertical center line of vessel to face of rear support columns
Tuyère Line (for Puncher Automation System only)
How many tuyères are there in the line
Is there enough room to allow the puncher to travel two tuyère spaces past
the last tuyère on both ends?
What is distance from the column (for mounting the distance measuring instrument)
to the edge of the Gaspé?
Tuyère Pyrometer
Is one or more installed?
Where is it (they) installed (tuyère number)?
Additional Comments
Gaspé Puncher Data
Vertical load on riding rail = 15.6 kN (3,500 lb)
Horizontal load on thrust rail = 22.2 kN (5,000 lb)
