Slurry Sampling Questionnaire

Please fill out the form below and give us as much information about yourself as possible. Fields marked with an asterisk (*) are required.

We will only use your e-mail address and information supplied by you to contact you about services/products that you have indicated are of interest to you.

Contact Information
* Company		* Project
* Contact		* Title
* Phone		* Fax
* Email		Website URL
Purpose
Process Control (Analyser)		Metallurgical Accounting Size
Inventory Control		Other Moisture
PricingBudget Firm
Quote Required by		Target Date for Installation

Process Characteristics
Location (e.g. Cyclone O/F)
Desired Sample Interval (i.e. 3x/hr, etc.)
Hours per Shift
Final Amount of Sample Req'd/Shift
Remarks
Material Characteristics
Feed Rate	USGPM m3/hr TPH Slurry Solids		Min Max
Particle Size		µM Mesh	95% Passing
S.G. Solids S.G. Slurry %Solids pH			Acidic Alkaline
Temperature: Min Max		Froth Factor
Ambient Temperature Min Max
Location of Sampler Interior External
Assay Analysis (e.g. CU, Pb, Zn)
Special Considerations:
Abrasive Properties: Low High Corrosive Properties: Low High Scaling: Low High
Special Materials for Construction		Type of Lining

Remarks
Feed Conditions
Launder:
Width: Slurry Depth: Slope: From Horiz: Rubber Lined? Yes No
Pipe:
Nom Size: Material: Discharge Slope: Velocity:
Connection Type: Flanged Victaulic Slope: From Horiz: Total Head:
For Pressurized Pipes: Estimated Pressure (Head): psi (or Pump Pressure: psi)
Remarks